Buy Metal Python Suppressor Cover | Customize your own suppressor cover | Combines metal buckles of our Summit Cover and BOA straps from our Python cover


Starting at $68.00

(15 customer reviews)

  • Lifetime Warranty
  • Flat Rate Shipping
  • USA Made

Guaranteed Safe Checkout


The Metal Python Suppressor Cover is the most popular cover from Cole-TAC.  We took the outstanding metal buckles found on our Summit Cover and paired them with the awesome BOA straps from the Python cover.  This is truly the best of both worlds.  This cover will not slip or shift around on your can.

The only suppressor cover that you can design.  With our unique BOA straps, your cover will always stay in place while shooting.  Don’t get burned again.

Weight: 2.2 oz

When shooting at long ranges, every little detail becomes critical. The further out you go, the more those details can make or break your shot. Ensuring you have a clear sight picture can be one of the most important. If you cannot see your target, you cannot shoot it. As you begin to shoot, your suppressor gathers a lot of heat. This heat begins to rise off of the suppressor and creates a mirage. This mirage can obstruct your view making it almost impossible to see the target. Our Metal Python Suppressor Cover is made to mitigate that mirage coming off of the suppressor.

Only from Cole-TAC can you get the leading suppressor cover retention system. Using our unique BOA locking straps, you cover is secured to your suppressor ensuring it stays in place while shooting. Other covers out there loosen up over time and begin to slide off. When you are on target, the last thing you need is to look up at your cover. We have done extensive testing and found that the BOA system keeps the cover in place round after round. Other great benefits of the BOA straps include allowing for stretching over time, and being able to use it on similarly sized suppressors.

We also know that the environments can differ requiring different concealment. This is why we allow you to build the color scheme you need. You can personalize all aspects of the cover to suit your needs. Only Cole-TAC allows you to pick every color all of the way down to the buckles.

Our covers are made from only the highest quality materials. The inside material is rated to 1800°F. The outer shell is a durable 1000 Denier Cordura Nylon that is water resistant and stands up against fading, abrasion, rot, and mildew. We even chose a high quality fire resistant thread to ensure every aspect of the cover can stand up to the toughest environments.


Please be sure to give the suppressor brand, model, length, and diameter. Do not use the dimensions that are given on the suppressor’s website. We have found that these are not always accurate. We will make the cover slightly shorter than the actual length due to stretching. This will prevent the end of the cover from getting hit with the muzzle blast and fraying.

Additional information

Weight .375 lbs


  1. Fridayone35 (verified owner)

    The cover arrived in about 2 1/2 weeks which was right on schedule. Excellent craftsmanship and exactly what I ordered. Fantastic product from a great company.

  2. Matt (verified owner)

    This cover does a fantastic job of mitigating mirage. Shooting my rifle is night and day different with it. The craftsmanship is superb, and I’ll certainly recommend it to others.

  3. Eric John Denman (verified owner)

    Fit was dead on perfect. I just shot two days out of a local 3 day match series. Cover has not slipped once and does a phenomenal job of preventing suppressor mirage. I had a different companies cover that slipped a lot and fell apart after a year. This one is built very well and I can see it lasting a really long time. Well worth the reasonable cost.

  4. Ben Fugate (verified owner)

    Well made, looks great and holds tight to my suppressor.

  5. Joshua Cass (verified owner)

    Arrived right at the 3wk mark – which based upon reviews was right on point. Cover is extremely well made and the fit was perfect. Cover slips forward just a little after longer strings of fire, but nothing that is concerning. I was deciding between this and am Armageddon Gear cover, and after the reviews and a multitude of reading I went with the Cole-tac…no complaints here. Will recommend.

  6. David R. (verified owner)

    5 stars actually deserved 10. Excellent suppressor covers. Great service.

  7. Rene H. (verified owner)

    The cover is well constructed. A little gripe about the website though. I didn’t have my can handy to measure but the Ultra 9 dimensions were listed on the size chart, so I went with those. It turns out they are wrong, it should be nine inches even, not 8.75. Close enough, but not correct.

    • Ty

      Thank you for pointing out the difference in our sizing chart. We recommend the 8.75″ length for the Ultra 9 because of the .125″ chamfer on both ends of the suppressor. If you would like, we will gladly remake the cover for you. I will be emailing here shortly to ensure we take care of you.

  8. Rolando moreno (verified owner)

    It’s a fantastic suppressor cover absolutely happy with it no slippage fit perfect the buckles the material were all top notch.
    The reason for the four stars is because I also bought the matching pouch to store it and a suppressor with the cover does not fit in the pouch only the suppressor without the cover I’m going to call. Cole tac as soon as I get back from my Texas hunt to see if they can remanufacture me one that will fit with the cover in it overall I’m absolutely pleased

  9. Tucker M. (verified owner)

    I’m utterly impressed. This is my first suppressor cover. I’m running this on a 30 cal Form 1 can which is pretty slick (uncoated titanium tube) and it seems to stay in place even with it being so slick. Plans to sandblast and cerakote soon so there shouldn’t be any trouble.
    Nonetheless, it handles my 300 blackout well as well as .308. I don’t really mag dump with my 300 or my .308 so I think it should last a while. Heat mitigation is great compared to no cover at all.

    The hand stitching is superb. I got my cover color in Woodland/M81 and it’s perfect. Straps are heavy duty and the metal buckles will probably outlast me. Overall, I’m very satisfied.

  10. ronnie cookson (verified owner)

    This is my first cover and I could not be any happier.Quality and stitching are excellent.Great fit on my Liberty Regulator.Well worth the money.

  11. ADAM TURNBULL (verified owner)

    Great fit, great options for colors and design, and great website with the product builder.

    I own the baby and the full size now.

  12. Jon Given (verified owner)

    excellent quality. Fits my Hybrid snug and length is perfect. Added the Stricta cord and works as advertised. Will be coming here for any future suppressor covers.

  13. Jordan (verified owner)

    Got my cover in 10 days from the day I ordered (was expecting 2 weeks minimum). The fit is exactly perfect for my can. The craftsmanship is insane. I took it out yesterday for the first time and here are my takeaways, heat mitigation was awesome! So awesome that I forgot that the buckles are made of metal and they were hot. The fabric was warm but totally manageable. There was some slippage but after the cover heated up I was able to tighten up the straps. I’m sure that the longer it’s tightened down the better it will get. Super happy with my purchase.

  14. Taylor (verified owner)

    Haven’t had a chance to shoot with it yet, but this cover fits great. Based on the Suppressor sizing chart, the Metal Python perfectly covers my suppressor without blocking its locking collar.

  15. Kyle Massaro (verified owner)

    Received the cover in a timely fashion. Quality as promised and I liked all the cover/strap/buckle options. Fits my fan perfectly.

Add a review

Your email address will not be published. Required fields are marked *